10Micron GM3000 HPS ColdTemp

Name: 10Micron GM3000 HPS ColdTemp
Brand: 10Micron
SKU: 1453000C
Price: 21700 EUR
Availability: InStock

€21,700.00

Tax included

10Micron GM3000 HPS ColdTemp 10Micron GM3000 HPS ColdTemp combines the 100 kg instrument capacity of the standard mount with the manufacturer’s special low-temperature configuration. It is a German equatorial HPS mount with absolute on-axis encoders, precision worm gearing and two-axis brushless servo drive.

Manufacturer model: 10Micron GM3000 HPS ColdTemp · Specifications checked against manufacturer data on 2026-11-04

10Micron GM3000 HPS ColdTemp

10Micron GM3000 HPS ColdTemp combines the 100 kg instrument capacity of the standard mount with the manufacturer’s special low-temperature configuration. It is a German equatorial HPS mount with absolute on-axis encoders, precision worm gearing and two-axis brushless servo drive.

Cold-temperature equipment

10Micron specifies operation down to −30 °C for this option, using special low-temperature lubricants, silicone-sheathed wiring and suitable electronics. This is an operating specification for the ColdTemp build, not the much lower storage-temperature figure. It does not certify every attached camera, cable or third-party accessory for the same conditions.

Mechanics and performance

The model retains the standard mechanical architecture, 65 kg mount weight without accessories, 50 mm counterweight shaft and 2–12°/s published slewing range. The onboard model supports up to 100 points and compensates polar, orthogonality, refraction and flexure errors.

Control and installation

The 24 V DC system supports keypad and compatible remote computer/web control. Counterweights are separate. Match the power supply and GPS receiver to the actual control-box generation, and use the model-specific technical sheet and support interface for installation.

10Micron manufacturer documentation

10Micron model technical sheet

Compatibility notes

Current model technical sheet and full catalogue specify 100 kg payload and a 12°/s maximum slew.

Additional specifications

Model variant	Cold Temperature version
Cold temperature minimum (°C)	-30
Cold temperature measures	Special low-temperature lubricants, silicone-sheathed wiring and low-temperature electronics

Reference 1453000C

Data sheet

Axis dimensions: RA 80 mm; DEC 50 mm; alloy steel
Azimuth fine adjustment: ±10°
Base diameter in family drawing (mm): 288
Bearings: Preloaded tapered roller and roller-thrust bearings
Cable management: Internal through-axis routing
Communication ports: RS-232; GPS; ST-4 autoguide; Ethernet
Counterweight shaft diameter (mm): 50
Counterweight shaft material: Stainless steel
Counterweight shaft weight (kg): 8
Counterweights included: No
Dimensional drawing reference: At 45°: side height 663 mm; front height 578 mm
Encoders: Absolute on-axis encoders; closed-loop HPS control
Instrument payload (kg): 100
Keypad: Metal housing; heated dimmable display and backlit keys; standalone operation
Latitude range: 20–70°
Manufacturer current figures: Approximately 1 A tracking; 3.5 A maximum slew; 5 A peak
Manufacturer part number: 10M3000
Manufacturer pointing accuracy: Less than 20 arcsec with 25-star model; model supports up to 100 points
Manufacturer standard package: GM3000 HPS Mount; Controlbox; Keypad; Counterweight shaft; Cables set; Allen wrenches; Shipping Kit; Includes the shipping wooden pallet-box and pier adapter.
Manufacturer tracking example: Approximately 1 arcsec typical over 15 minutes; approximately 0.6 arcsec RMS with a 25-star model and flexure/polar-error compensation
Meridian limits: ±30° software; ±45° mechanical in RA
Model: 10Micron GM3000 HPS ColdTemp
Motors: Two-axis AC brushless servo
Mount type: German equatorial
Mount weight without accessories (kg): 65
Object database: Stellar and deep-sky catalogues; solar system objects, comets, asteroids and artificial satellites; user-defined targets
Operating temperature: −30 to +35 °C; ColdTemp configuration
Pointing model: Up to 100 alignment points; polar, orthogonality and refraction compensation
Remote control: Ethernet/Wi-Fi web interface, virtual keypad and compatible computer control
Slew speed range: 2–12°/s
Storage temperature: −40 to +50 °C; not the operating range
Supply voltage v DC: 24
Tracking rates: Sidereal, solar, lunar and custom rates
Transmission: Timing-belt reduction with automatic backlash recovery
Worm screws: RA 32 mm; DEC 24 mm; tempered, ground and lapped alloy steel
Worm wheels: RA: 315 teeth, 244 mm diameter; DEC: 250 teeth, 192 mm diameter; B14 bronze