TEC 10×60 finder — short bracket kit The Baader Vario optical assembly is paired with TEC mounting hardware. For TEC focusers without a retaining ring. Choose the bracket to match the focuser hardware.
Manufacturer model: TEC 10×60 Short finder kit — 1353111 · Specifications checked against manufacturer data on 2026-11-04
The Baader Vario optical assembly is paired with TEC mounting hardware. For TEC focusers without a retaining ring. Choose the bracket to match the focuser hardware.
Finder and guide-scope use
The supplied eyepiece provides illuminated aiming marks. Camera use requires suitable adapters and spacing; the TEC holder is a different assembly from Baader’s MQR-IV.
Baader makes the Vario optics used by TEC. This is explicitly combined manufacturer-component and official-bundle evidence, not a TEC-only kit datasheet. The supplied finder is 10×; 120× requires other eyepieces and a suitable diagonal. TEC's generic 114.3 mm travel is not used for the Vario component. MQR-IV hardware and specifications are excluded from this TEC-bracket kit.
Additional specifications
Bundle reference
1353111
Bracket version
Short
Mounting compatibility
For TEC focusers without a retaining ring
Clear aperture
61 mm
Nominal f ratio
Approximately f/4.1 (250/61)
Supplied magnification
10× with 25 mm eyepiece
True field
Approximately 4.5°
View
45° erecting Amici prism
Eyepiece camera interfaces
T-2 and 1.25-inch
Sliding travel
35 mm (Vario optical assembly)
Native backfocus
About 101 mm from base of T-2; objective/focuser retracted
TEC 10×60 finder — short bracket kit The Baader Vario optical assembly is paired with TEC mounting hardware. For TEC focusers without a retaining ring. Choose the bracket to match the focuser hardware.
Manufacturer model: TEC 10×60 Short finder kit — 1353111 · Specifications checked against manufacturer data on 2026-11-04
