Baader Variable T2 Extension 12–16 mm Optical Length with Guard Ring
€45.00
Tax included
Baader Variable T2 Extension 12–16 mm Optical Length with Guard Ring The Baader variable T-2 extension combines adjustable spacing with a counter ring for locking rotational orientation. The nominal adjustment range is 12–16 mm; the manufacturer also lists a 10 mm configuration within the three-part assembly.
Manufacturer model: Baader Variable T2 Extension 12–16 mm Optical Length with Guard Ring · Specifications checked against manufacturer data on 2026-11-04
Baader Variable T2 Extension 12–16 mm Optical Length with Guard Ring
The Baader variable T-2 extension combines adjustable spacing with a counter ring for locking rotational orientation. The nominal adjustment range is 12–16 mm; the manufacturer also lists a 10 mm configuration within the three-part assembly.
T-2 connections
The published connections are M42 × 0.75 male on the telescope side and M42 × 0.75 female on the camera side. The assembly can also act as a T-2 thread-inversion arrangement. Its stated inner diameter is 39 mm and outer diameter is 49 mm.
Rotational setting
The T-2 counter ring allows a connected camera or accessory to be locked in the desired rotational position. Select the assembly configuration and optical length before tightening the lock ring; the 10 mm figure is not an additional extension on top of the nominal range.
The complete optical-length entry is 12 (10)–16 mm and the short description identifies a 12 or 10 mm fixed configuration. The component-link list duplicates an entry, so uncertain subcomponent part numbers are not repeated.
Additional specifications
Nominal adjustment range
12–16 mm
Manufacturer optical length entry
12 (10)–16 mm, configuration-dependent
Telescope side thread
M42 × 0.75 male
Camera side thread
M42 × 0.75 female
Inner diameter (mm)
39
Rotation control
Counter ring locks the selected rotational position
10931
Data sheet
Construction
Three-part assembly including T-2 counter/locking ring
EAN barcode
4047825007339
Function
Variable spacing and T-2 thread inversion
Manufacturer net weight (kg)
0.02
Manufacturer part number
2958130
Model
Baader Variable T2 Extension 12–16 mm Optical Length with Guard Ring
Outer diameter (mm)
49
System
T-2, M42 × 0.75
Specific References
MPN
2958130
Used this product? Share your experience with other astronomers.
Comments (0)
No customer reviews for the moment.
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.
Baader Variable T2 Extension 12–16 mm Optical Length with Guard Ring The Baader variable T-2 extension combines adjustable spacing with a counter ring for locking rotational orientation. The nominal adjustment range is 12–16 mm; the manufacturer also lists a 10 mm configuration within the three-part assembly.
Manufacturer model: Baader Variable T2 Extension 12–16 mm Optical Length with Guard Ring · Specifications checked against manufacturer data on 2026-11-04
