ZWO ASI4400MC Pro | PixelSkiesAstro
search
  • ZWO ASI4400MC Pro | PixelSkiesAstro
  • ZWO ASI4400MC Pro | PixelSkiesAstro
  • ZWO ASI4400MC Pro | PixelSkiesAstro
  • ZWO ASI4400MC Pro | PixelSkiesAstro
  • ZWO ASI4400MC Pro | PixelSkiesAstro
  • ZWO ASI4400MC Pro | PixelSkiesAstro
  • ZWO ASI4400MC Pro | PixelSkiesAstro
  • ZWO ASI4400MC Pro | PixelSkiesAstro
  • ZWO ASI4400MC Pro | PixelSkiesAstro
  • ZWO ASI4400MC Pro | PixelSkiesAstro
  • ZWO ASI4400MC Pro | PixelSkiesAstro

ZWO ASI4400MC Pro

€3,590.00
Tax included

ZWO ASI4400MC Pro The ASI4400MC Pro is a cooled one-shot colour astronomy camera using the Sony IMX366 sensor. Its 36 × 24 mm imaging area records 8192 × 5460 pixels with 4.4 µm pixels and a native 14-bit ADC.

Manufacturer model: ZWO ASI4400MC Pro · Specifications checked against manufacturer data on 2026-11-03

  Security policy

(edit with the Customer Reassurance module)

  Delivery policy

(edit with the Customer Reassurance module)

  Return policy

(edit with the Customer Reassurance module)

ZWO ASI4400MC Pro

The ASI4400MC Pro is a cooled one-shot colour astronomy camera using the Sony IMX366 sensor. Its 36 × 24 mm imaging area records 8192 × 5460 pixels with 4.4 µm pixels and a native 14-bit ADC.

Imaging performance

ZWO specifies 74,600 electrons full-well capacity, peak quantum efficiency of 80% and read noise of 1.1–7.6 electrons. The listed capture rate is 8.3 fps, full frame USB 3.0 RAW8 high-speed; actual transfer speed depends on image size, ADC/output mode and USB connection. The colour sensor records colour in a single exposure sequence, supporting deep-sky imaging without separate RGB filter exposures.

Cooling and data transfer

Two-stage TEC cooling reduces thermal signal during long exposures. The manufacturer cooling specification is Two-stage TEC; 30–35 °C below ambient, tested at 30 °C ambient. A 512 MB DDR3 buffer and USB 3.0 connection support reliable downloads.

Connections and power

The camera connection is M54 × 0.75 female, with sensor spacing of 12.5 mm bare; 17.5 mm with tilt plate. The protective window is 60 × 2 mm UV/IR-cut window. Use a 12 V DC, 3–5 A supply with a 5.5 × 2.1 mm centre-positive connector; the recommended battery range is 11–14 V. Include adapters and any filter wheel when calculating telescope backfocus.

ZWO manufacturer documentation

Compatibility notes

Use the exact named-model manufacturer connection and operating instructions linked with this product. Optional parts and adapters require their specified spacing and power limits.

Additional specifications

Tilt adjustmentThree push-pull screw pairs
88178

Data sheet

ADC (bits)
14
Battery voltage range
11–14 V
Body diameter (mm)
90
Buffer
512 MB DDR3
Camera thread
M54 × 0.75 female
Colour mode
Colour
Cooling
Two-stage TEC; 30–35 °C below ambient, tested at 30 °C ambient
Dew heater (W)
5
Exposure range
32 µs–2000 s
Full well (e⁻)
74600
Hcg gain
136
Interface
USB 3.0; USB 2.0 compatible
Maximum frame rate
8.3 fps, full frame USB 3.0 RAW8 high-speed
Peak QE (%)
80
Pixel size (µm)
4.4
Power supply
12 V DC, 3–5 A recommended; 5.5 × 2.1 mm centre positive
Protective window
60 × 2 mm UV/IR-cut window
Read noise (e⁻)
1.1–7.6
Resolution (px)
8192 × 5460
Sensor
Sony IMX366
Sensor backfocus
12.5 mm bare; 17.5 mm with tilt plate
Sensor diagonal (mm)
43.3
Sensor dimensions (mm)
36 × 24
Shutter
Rolling shutter
Software
Windows; Linux; macOS with compatible ZWO software/drivers
Weight (g)
700
Comments (0)
No customer reviews for the moment.